双层结构模糊综合决策的AIS与雷达航迹关联

根据AIS 与雷达关联的一般原则, 首先对AIS 航迹和雷达航迹进行时空配 准,接着将配准后的航迹进行时间和距离上的初级关联判断,对满足初级关联但是又难 以判断的航迹进行高级关联判断。在高级关联判断阶段提出一种双层结构模糊综合决策 的航迹关联方法,仿真实验表明新方法在提高关联正确率和降低关联错误率方面有了明 显改善。     

航空电子MB-OFDM-UWB无线互连信道分析与仿真

多频带正交频分复用超宽带（MB-OFDM-UWB）是航空电子内部无线互连（WAIC）的候选通信体制之一，不同于普通的室内无线信道，超宽带信号在金属和复合材料的机舱内部存在复杂的反射和多径干扰。给出一种适用于WAIC应用的MB-OFDM-UWB无线通信系统物理层方案，并参照IEEE802.15.4a标准提出一种适应航空电子机舱内部特征的多簇多径UWB信道模型；通过基于接收球的反射角误差法仿真得到无线信道的冲激响应，确定了机舱环境下信道模型的簇到达率、径到达率和混合因子；进而采用Simulink进行MB-OFDM-UWB信号系统仿真，表明在110 Mb/s码速率条件下，当误码率低于国际电信联盟（ITU）标准规定的10^-6，机舱环境下的信噪比应比普通室内环境高1 dB。另外，在研究过程中，为了确认电磁仿真中接收球半径的有效性，针对基准环境将仿真结果与文献报道的实测结果进行了对比。     

基于碳纳米管薄膜的复合材料层间增韧

通过浮动催化化学气相沉积法制备连续碳纳米管薄膜，并将其原位沉积到单向碳纤维织物表面，手工铺层后借助真空辅助树脂传递模塑成型（VARTM）工艺制备碳纳米管-碳纤维/环氧树脂复合材料层压板，研究不同面密度的碳纳米管薄膜对层压板Ⅱ型层间断裂韧性的影响。结果表明，随着碳纳米管薄膜面密度的增加，层压板Ⅱ型层间断裂韧性先逐渐提高，当碳纳米管薄膜面密度为9.64 g/m²时，层压板Ⅱ型层间断裂韧性最佳，与原始层压板相比提高了94%。碳纳米管通过桥接树脂裂纹、从树脂中拔出等方式提高层间断裂韧性。当碳纳米管面密度超过临界值时，会引起树脂浸润困难，导致增韧效果降低。     

航空／海洋重力仪用加速度计现状与优化方法

采用石英挠性加速度计作为重力敏感器的航空/海洋重力仪是典型的重力信息采集仪器,要求石英挠性加速度计具有一次通电稳定性高、高分辨率、低噪声的特点。为了满足航空/海洋重力仪需求,首先,分析了石英挠性加速度计一次通电稳定性机理,确定了关键影响因素,并给出了优化方向;其次,建立了加速度计分辨率模型,给出了测试方法和后续优化方向;最后,通过试验确定了噪声水平,根据关键影响因素给出了优化方向。通过上述研究的开展,为石英挠性加速度计在重力测量领域中的应用奠定了基础。     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

模块化核动力航天器设计及其关键技术

为提高核动力航天器关键技术的可继承性与可扩展性,缩短核动力航天器研发周期,降低研发成本,本文通过总结国外核动力航天器发展现状,梳理核动力航天器研制特点,结合模块化航天器概念及设计原则,首次提出模块化核动力航天器概念。将核动力航天器分为核电源模块、平台中心模块、载荷模块3大独立模块,并针对体系架构设计提出3层建设方案,针对模块化核动力航天器梳理关键技术难点,为后续项目研究提供应用参考。     

双向比对高精度物理时间同步方法

提出一种面向未来卫星在轨应用的闭环物理高精度时间同步方法。比较了所提方法与其他时间同步方法的区别与优势，建立了远程系统时间同步基本模型与误差传递模型，基于双向测距和时间传递技术分析了高精度钟差获取原理，给出了时钟调整环路的时域频域参数依赖关系。完成了高精度时间同步地面试验系统构建，测试了开环非调钟状态下钟差测量精度误差、闭环调钟状态下时间同步准确度误差以及长时运行情况下的时间同步监测结果。测试结果表明，该方法能够实现优于1 ns量级的时间同步，为高精度时间同步技术研究提供了新的途径。     

一种基于非线性回归的载人航天器密封舱内在轨噪声分析方法

文章提出一种载人航天器密封舱内噪声非线性回归通用分析方法,可基于地面噪声试验测得的数量较多的数据样本和在轨噪声测试获取的少量数据样本,建立密封舱内位置–在轨噪声的数学模型。经验证该模型能够较为准确地拟合密封舱内在轨噪声水平,从而为开展载人航天器的降噪设计、优化噪声仿真模型和验证降噪措施效果提供数据支持。     

橡胶减振垫在航天器中的应用及验证

文章针对某航天器振动试验过程中出现的自锁阀及其安装支架振动响应放大问题,提出了一种采用橡胶减振垫的解决措施,给出了增加减振垫后设备安装的刚度模型及其分析,并通过振动试验验证了这种方法的有效性。试验结果表明:采用橡胶减振垫可以较好地解决部分航天器上仪器设备在振动环境条件下响应超标的问题,措施简单有效,满足使用要求,具有一定的推广应用价值。     

Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.